Shop Categories
- Label Makers
- All Camera & Photo
- Batteries
- All IBM
- More
- Black & White
- Minidisc Players
- AudioSource
- AMD-Powered Desktops
- Lenses
- USB Flash Drives
- NEC-Mitsubishi
- Crossovers
- Subwoofers
- Close-Up Lenses
- Rangefinder Lenses
- Home Theater Systems
- Screen Filters
- Other Telescopes
- PhotoSmart Printers
- InnoGear
- Answering Devices
- Panasonic
- Electronics
- 6.5 Inch
- Watches
- Home and Garden
- UK Electronics
- UK Books
- Health and Personal Care
- UK Sporting Goods
- Clothing, Shoes and Accessories
- Electronics, Gadgets and Computers
- CDs and Music Downloads
- UK Software and Video Games
- UK Toys and Games
- UK Home and Garden
- UK Video Games
- UK Baby Clothes and Accessories
- Books On
- German Electronics
-
Pages:
[ 0 ]
-
Bowens
The Bowens Transceiver Pulsar Radio Slave Trigger is a multifunctional device, which can be used to trigger flash units, film and digital cameras and light meters up to 100m. Because it uses radio transmission, rather than IR, it allows triggering around corners, through walls and is not affected by high ambient light situations. Choose from four individual channel and six studio selectors, each providing a unique ID for a different flash device or combine them to trigger all equipment within a given setup or studio. Pulsar also features a hot-shoe mount, sync in and sync out terminals, a ready indicator, a test button and an external power option. Because of its low-voltage operation, it is perfect for digital cameras. Each unit can be used as either a transmitter or receiver and is powered by just two AAA batteries. Whether you are triggering flash heads for complicated lighting setups or cameras for remote control nature shots or applying a special effect, this system is for you. Each Pulsar unit can be either a transmitter or receiver and is capable of sending or receiving signals beyond 100m (333'). The Pulsar has four separate channels, enabling the photographer to isolate up to four light sources or to combine them and fire all of them at once without leaving the camera. Additionally, the Pulsar has a studio selector switch, which provides isolation from other Pulsar units using the same channel, and allowing up to six different systems to
-
Quantum
Use the Radio Slave 4i to synchronize any number of remote flashes without long sync cords, or, connect Radio Slave to trip motor drive cameras at great distances. This most popular radio trigger uses digitally coded signals that work indoors, outdoors, around corners and through walls. Unlike other slaves, it cannot be overpowered by the light of a flash. The Radio Slave system syncs at up to 1/500 sec. with focal plane shutters and 1/1000 with leaf shutters. Radio Slave is virtually indistinguishable from "wired" sync, and there is no waiting between triggers as with infra-red slaves. When mounted on a camera hot shoe, the Sender unit get it's shutter sync withoutexternal cords. The Remote units connect directly to flashes using the flash sync cord. Adapters are not needed. Radio signal confirmation is assured by Radio Slave's status light. It also warns hours in advance of low battery. Battery life of the Remote is 400 hours with alkaline or 800 hours with lithium AA cells. The Sender unit's battery lasts 1-2 years! Each Radio Slave has 4 channels of operation and comes in one of 4 discrete frequencies, to avoid interference from other shooters. Take RadioSlave from studio to wedding hall to coliseum. Radio Slave 4i is compatible with the Radio Slave 4 and Radio Slave 2. Be sure to match the labled frequency (either A,B,C, or D) with your previous units. (Radio Slave is not compatible with FreeXwire.)
-
Seculine
Please Note: This unit is Receiver ONLY TwinLink from Seculine is a radio flash trigger kit which provides a complete solution for photographers to wirelessly trigger both their studio flash systemsand camera flash systems. Wireless Technology: The Seculine T2D incorporates a combination of 2.4Ghz radio frequency and Infra Red signals to give faultless triggering response, each and every time the shutter is fired. The transmitter and receiver being triggered by a Radio Frequency will operate in situations where you do not have line of sight, so that the flash equipment can be hidden behind walls and objects in your image for the best lighting effects. Multi Channel: The transmitter and receiver have 16 selectable channels so that you can ensure you are using a different frequency to other photographers that may be sharing the same studios. If you do however choose to use multiple receivers then they can be set to the same channel for multiple flash response. Range: The TwinLink system has been designed to give the best possible coverage, with arange of up to 150ft indoors and up to 600ft outdoors making it a hugely versatile system, especially when using multiple receivers and flash heads to light large areas. Power Saving: On both the T2D transmitter and receiver you can adjust the power off time from 5 minutes to 95 minutes to save batteries in the event of the unit not being used for prolonged periods.
Flashpoint
JTL
The JTL DigiFirer is a digitalized radio trigger system designed for photographic studios and on-location work. It is composed of two units: a radio trigger and a digital receiver, both easily installed on any type of light. The DigiFirer can be used with a variety of studio flashes, strobes (AC & DC), and monolights (monobloc). The JTL DigiFirer will eliminate flash slave interference among strobe lights in your studio. Many receivers can be added for lights in different areas of a room or studio. Outdoors, this receiver can be added to battery operated units where infrared slaves would fail because of sunlight or blocked by props
Morris
Profoto
The Profoto Air Remote is a proprietary radio slave transceiver designed to work exclusively with the Pro 8a 1200 and 2400 Ws power packs. This transceiver can control an unlimited number of power packs and heads on eight channels. It can mount to your camera's hot shoe, or sync to your flash terminal for firing. Operating from two AAA batteries, at a frequency of 2.4GHz, the Air Sync has a range of 1000' (300 m). It can sync up to 1/250 second with a focal plane shutter camera and 1/500 second with a leaf shutter camera. Its triggering speed is over 100 fps.
Bowens
The Radio Trigger Card can be inserted into the slot on the back of the Gemini unit and then fit the antenna into the socket on the side and your monolight to receive signals from a PocketWizard Radio Trigger unit mounted onto your camera.
Interfit Photographic
The Interfit One Channel Radio Slave Receiver is specifically designed for use with the Interfit Flash systems and your Interfit Radio Slave Transmitter. Powered by twin "AAA" battery cells, this radio slave receiver has a range of up to 165' (50 m).
Elinchrom
EL Skyport USB RX Transceiver (EL 19354) The EL Skyport USB RX Transceiver works in conjunction with the free EL Skyport Software, available for PC or Mac. The USB RX Transceiver is designed to send and receive information from the Universal Receiver and the RX Receiver. The EL USB RX Transceiver: Provides communications between the computer and the lights used on a project Supports four workgroups and can control individual, groups or all heads No battery necessary as power comes from the computer EL Skyport Software The EL Skyport works with PC and Mac's and is designed to help create, fine tune, document (then save for future use) the simplest to the most complex of lighting projects. Skyport software requires a Skyport USB RX Transceiver to work, and when launched will located any flash unit that has a Skyport Universal or RX Receiver. When it locates an RX head or pack it will provide a duplicate of the units control panel. Everything that can be controlled from the head or pack can be controlled from Skyport software. The USBRX Transceiver: Can control up to 16 lights per workgroup, 64 per studio Complex lighting setups (studio, camera, object, background and light positions) can be documented, saved and printed Lighting setups can be edited and used over and over Stroboscopic effects can be created easily using any connected head Built in module tester
Speedotron
Photogenic
The RTT hot shoe mounted transmitter will trigger AKC "R" and "BR" StudioMax III lights from a distance of 80 feet. It's also for use with the 4-channel RTR receiver. Includes the battery and a cord for cameras with PC connection but no hot-shoe connection.
Quantum
For use with Radio Slave 4i Sender. The Remote frequency needs to match your the frequency of your existing set.
Pages: [ 0 ]