Quantum Radio Slave 4i Set, Wireless Flash System Control - Frequency-C

Use the Radio Slave 4i to synchronize any number of remote flashes without long sync cords, or connect Radio Slave to the camera drive motor to travel great distances. This is the most popular radio trigger uses digitally coded signals that work inside, outside, in the corners and through walls. Unlike other slaves, can not be defeated by a light flash. Radio Slave system syncs at up to 1 / 500 sec. with focal plane shutters and 1 / 1000 with leaf shutters. Radio Slave is virtually indistinguishable from "wired" sync, and there is no wait between the start of the slaves infrared. After mounting the camera's hot shoe, the device is synchronized shutter Sender For withoutexternal cords. Remote units connect directly to flash using the flash sync cable. Adapters are not needed. confirmation of the radio signal is provided by the light on the status of Radio Slave. Also warns hours in advance of low battery. Battery life in the remote control is 400 hours with alkaline or 800 hours with lithium AA cells. Sender unit battery lasts 1-2 years! Radio Slave everyone has 4 channels and is working in one of four discrete, to avoid interference with other shooters. Take RadioSlave from studio to wedding hall for Colosseum. Radio Slave 4i is compatible with the Radio Slave 4 and Radio ...More